Search found 157 matches

by bmsaus4ax
Sun Aug 14, 2022 5:38 am
Forum: Path/CAM
Topic: 3D Pocket
Replies: 7
Views: 381

Re: 3D Pocket

@chrisb I want to "1) You want to mill the inside and selected the wrong face. Face1 is on the outside, not on the inside." I was able to get inside my object using View>Clipping plane. It does not make any difference. I am really struggling duplicating my actions. When I select the faces...
by bmsaus4ax
Sun Jun 26, 2022 10:56 pm
Forum: Path/CAM
Topic: Pocket inside to outside
Replies: 3
Views: 514

Re: Pocket inside to outside

On the top layer it just starts on the periphery :( There is a setting "Start From" that's set to center, but it doesn't seem to have any effect, the result is the same if I set his to Center or Edge. After creating the operation , then in the Data tab, at the bottom of the list is the he...
by bmsaus4ax
Wed Jun 22, 2022 10:31 pm
Forum: Path/CAM
Topic: FREECAD 0.20.29177 AppImage Path Workbench "'_TempObject' object has no attribute 'InList'"
Replies: 1
Views: 257

Re: FREECAD 0.20.29177 AppImage Path Workbench "'_TempObject' object has no attribute 'InList'"

Upon attempting to postprocess a job, I receive the following error. I'm not able to post process any any jobs since updating. Please let me know if there's any further information I can provide. This was attempted in the latest edge build last night, but that build failed to load the Path bench at...
by bmsaus4ax
Fri Jun 03, 2022 11:03 pm
Forum: Path/CAM
Topic: Inspect G-code dialog make moveable
Replies: 9
Views: 675

Re: Inspect G-code dialog make moveable

I just found a problem with the change: When I select a (profile) path and inspect it, then there is a new object named "selection" created, which lies outside of the whole Job. This is happening in Ubuntu 20.04 also but only while the Inspect Window is open , clears when Inspect is close...
by bmsaus4ax
Fri Jun 03, 2022 10:43 pm
Forum: Path/CAM
Topic: Inspect G-code dialog make moveable
Replies: 9
Views: 675

Re: Inspect G-code dialog make moveable

Hello everyone. I am on Ubuntu. I wil try the Gnome fix. Thanks for the tip jescombe .I also forgot the about info. jescombe also wrote: Are you using Linux / GNOME maybe? If so, this can be fixed in the GNOME Tweaks tool... Windows -> Attach Modal Dialogues -> Off Thank you to both WarrenkCash and...
by bmsaus4ax
Mon May 16, 2022 3:01 am
Forum: Path/CAM
Topic: [SOLVED] Cannot modify the step-over of the helix
Replies: 20
Views: 1532

Re: [SOLVED] Cannot modify the step-over of the helix

Need some eyeball on this. My concern is that with this approach, the tool NEVER crosses the center point. It can (probably will) leave a small bump in a blind hole. The old way didn't do this but created more stepovers than necessary. Looks good when I tested. May need to modify the .ui file when ...
by bmsaus4ax
Sat May 14, 2022 12:38 am
Forum: Path/CAM
Topic: How I mill a concave zone?
Replies: 23
Views: 1893

Re: How I mill a concave zone?

I explored the solution proposed by bmsaus4ax and Russel (i.e. a 3D surface operation), unfortunately they have both the same defect: the use of a ball nose bit like... a drill. . So the 3D surface is a no-go option for me. So it seems that Path does not offer any chance to "enter" into t...
by bmsaus4ax
Fri May 13, 2022 10:08 pm
Forum: Path/CAM
Topic: How I mill a concave zone?
Replies: 23
Views: 1893

Re: How I mill a concave zone?

With a couple of minor tweaks the operation you have in your uploaded file can do it all in one pass. Do you mean by using a 3D-Surface operation? (As suggested by Russel also.) In the above example I used a 3D-Pocket operation, and I cannot find the parameters you mentioning about. The original fi...
by bmsaus4ax
Wed May 11, 2022 10:44 pm
Forum: Path/CAM
Topic: How I mill a concave zone?
Replies: 23
Views: 1893

Re: How I mill a concave zone?

I'm thinking at the best strategy to mill many pipe collars that allows me to reduce the amount of manual operations and accurate position settings. Here the question: there is any chance to use the Path WB to obtain a path trajectory like the one depicted from the yellow arrow in the image below? ...
by bmsaus4ax
Sun May 08, 2022 12:02 am
Forum: Path/CAM
Topic: DynaPath Delta PP Assistance Requested.
Replies: 8
Views: 972

Re: DynaPath Delta PP Assistance Requested.

bmsaus4ax -- I tried to run the models in your file but the only one that would work with my PP was JOB002. The error had to do with how I'm using the document Label to name the program file. JOB and JOB001 didn't have a document label assigned. All that aside, JOB002 inserted the same two Z axis l...