this is not exactly what I understand (from the French Wiki) multitransform is possible by using the basic elements
in my example I keep your version of a Polar 2X at 90° and I add a Multitransform of the same hole 3x at 90° to the right
we cannot multitransform a Polar
Search found 8022 matches
- Tue Apr 23, 2024 3:27 pm
- Forum: Help on using FreeCAD
- Topic: MultiTransform on PolarPattern → Traceback
- Replies: 4
- Views: 90
- Tue Apr 23, 2024 2:54 pm
- Forum: Help on using FreeCAD
- Topic: Struggling with sketch of bottle holder (race bike)
- Replies: 4
- Views: 87
Re: Struggling with sketch of bottle holder (race bike)
it's not more complicated to make circles than straight lines, you just need to know where to put the tip of the compass (on LCD screens, it's easier than on old glass screens ), but I'm misplaces, the tool for making arcs by 3 points is very useful
- Tue Apr 23, 2024 2:39 pm
- Forum: Help on using FreeCAD
- Topic: MultiTransform on PolarPattern → Traceback
- Replies: 4
- Views: 90
Re: MultiTransform on PolarPattern → Traceback
you cannot apply a Multitransform on a PolarPattern (the reverse either)
Multitransform is made precisely to do as many transformations as you want, it still has to be compatible
Multitransform is made precisely to do as many transformations as you want, it still has to be compatible
- Tue Apr 23, 2024 2:32 pm
- Forum: Help on using FreeCAD
- Topic: Pocket goes away when I add polar array
- Replies: 4
- Views: 102
Re: Pocket goes away when I add polar array
I see that you are in PartDesign, but you made an Array in Draft, by mixing the 2 workbenchs you created the error
- Tue Apr 23, 2024 12:54 pm
- Forum: Help on using FreeCAD
- Topic: PartDesign Thickness doesn't cross planes?
- Replies: 3
- Views: 189
Re: PartDesign Thickness doesn't cross planes?
since I'm a good grandpa, I'm going to show you something funny:
you select the upper face (oval) you Pad and at the end you obtain a new perfectly circular section and the same diameter as the base
you select the upper face (oval) you Pad and at the end you obtain a new perfectly circular section and the same diameter as the base
- Tue Apr 23, 2024 12:42 pm
- Forum: Help on using FreeCAD
- Topic: PartDesign Thickness doesn't cross planes?
- Replies: 3
- Views: 189
Re: PartDesign Thickness doesn't cross planes?
I don't understand why you are multiplying posts on the same subject
ask the question 15 times you will get the same question 14 times same reply plus one who did not understand
ask the question 15 times you will get the same question 14 times same reply plus one who did not understand
- Tue Apr 23, 2024 12:34 pm
- Forum: Help on using FreeCAD
- Topic: Sketch fully constrained, but still not
- Replies: 5
- Views: 145
Re: Sketch fully constrained, but still not
best practice: turn this Line in blue (Line construction) and do the fillets in the sketch
more: use equality
more: use equality
- Tue Apr 23, 2024 9:41 am
- Forum: Help on using FreeCAD
- Topic: Joining two cylinders at an angle
- Replies: 7
- Views: 343
Re: Joining two cylinders at an angle
Edit of Edit : delete your other post since it was answered here
- Tue Apr 23, 2024 9:25 am
- Forum: Help on using FreeCAD
- Topic: Joining two cylinders at an angle
- Replies: 7
- Views: 343
Re: Joining two cylinders at an angle
if you want you can do a zigzag
don't forget to specify "transition > right corners"
Edit: With the latest version, there is no more self intersection with "Round corner" good news
don't forget to specify "transition > right corners"
Edit: With the latest version, there is no more self intersection with "Round corner" good news
- Tue Apr 23, 2024 9:12 am
- Forum: Help on using FreeCAD
- Topic: Sheet metal extend to create angled edge for slope-faced cabinet
- Replies: 8
- Views: 413
Re: Sheet metal extend to create angled edge for slope-faced cabinet
I understood what you want
I don't start with PartDesign, that causes problems when you have cuts to make, so I use Sketcher and SheetMetal, if necessary PartWb for angled cuts
I don't start with PartDesign, that causes problems when you have cuts to make, so I use Sketcher and SheetMetal, if necessary PartWb for angled cuts